CPU: i7 920
mobo; Gigabyte X58 UD3R (Bios F4b)
Memory: OCZ Reaper Series PC3 15000 2gb x 3 kit
GPU: nvidia GTX295
HDD: SATA II Samsung 500gb 7200rpm
PSU: Andyson M800 watt
OS: XP Pro Sp2 (No Vista, plz)
200mhz Bclk x 21(Turbo Mode enable) direct boot and load into OS for benching
Pi32mil, eve and sandra done.
Pls take note that this mobo only support CF and not SLI. This mobo only offering 4 memory slots like intel X58 Smackover. Overall, this mobo is running cooler thanks to its 2oz copper. One big con si that PCI-E slot for gpu is too close to each other. Some ATI gpu might not be able to run side by side for CF. So make sure you check before buying any ATI gpu for CF.
One more thing is that the CMOS jumper is just underneath the gpu if u have gpu as long as GTX295. This will block the CMOS jumper and u might not be able to clear the CMOS jumper using screw driver to short the pin. So in order to clear the CMOS u need to remove the gpu