[youraunti]

Originally Posted by ChaoticOrb

Thanks for your insight.
I was thinking more into 'removing the stock fans and plastic cage', and fit rad+pull fan.

Yes, that is what I want to do too. But going with that choice, you will only have 14 inch to play around with for all 3 items.

There are lots of rad+fan combos. One of them, I think that is pretty okay is the gentle typhoons 1800RPM fans + MCR320 Rad combo is about 60mm which is slightly more then 2inches. This will allow you to have a 11+ inch GFX. *Assuming you remove the stock fans and 'cage'.

You can also have add a 120mm rad+fan installed above at the top exhaust of the casing into the loop.

[lee-turbo]

looking for new casing, budget ard 200+ to 300
cheaper the best
really like ft01 but no cpu cooler cut out....
any recommend case?

[cinabolic]

Originally Posted by lee-turbo

looking for new casing, budget ard 200+ to 300
cheaper the best
really like ft01 but no cpu cooler cut out....
any recommend case?

RV01?

[alphangel]

Originally Posted by lee-turbo

looking for new casing, budget ard 200+ to 300
cheaper the best
really like ft01 but no cpu cooler cut out....
any recommend case?

if you really want to have the cut-out. you can always get it done. =)

[lee-turbo]

how much i need to pay for FT 01, if i want to get that?

[fantasy87]

why not consider the RV series??

[lee-turbo]

ts 07 and tj 09 which one is better?
any owner ?

[lee-turbo]

TJ 07 and FT 02
same prices, which one will u take?

[Jarrax]

dear all, new owner of sg01f

can anyone teach me on the finer aspects of cooling for this casing? i noticed that my 965 is running at almost 54oC after 3 hrs..... idle is ard 42oC. but temps build up over time....

also, does the stock cpu fan run at 6K rpm all the time? cos tt's wat happens to mine and it still doesn't cool down.... TIA

[maverick317]

Jumped from TJ-09 to a RV-02E

[hellpiggy]

hey guys..owning a black rv02... bout 1 year 3 months old... i've been looking for led fans to replace the stock 180mm ones in the rv02... but so far i only manage to find silverstone selling them and in blue colour only... trying to look for red ones...anyone klnw where to find them?

[audilogic]

Hi guys, i own a FT02BW, would love to join the club.

Got a question, i'm currently running a noctua u12p, i'm thinking of changing to the antec khuler or corsair h70, however i have read many different views on whether to set the fan orientation as intake or exhaust. if i were to set it as intake, would i disrupt the air pressure in the case?

any owners of both products care to comment on how they have done it?

[alphangel]

Originally Posted by audilogic

Hi guys, i own a FT02BW, would love to join the club.

Got a question, i'm currently running a noctua u12p, i'm thinking of changing to the antec khuler or corsair h70, however i have read many different views on whether to set the fan orientation as intake or exhaust. if i were to set it as intake, would i disrupt the air pressure in the case?

any owners of both products care to comment on how they have done it?

yes, it will definitely affect the temp. also, it will be more advisable to use air-cooling hsf as i have tried using h50 b4 in the case and it does not work out that well and i switch back to air-cooling hsf. afterall, FT02 is built for air-cooling rig. =)

u12p is good enough inside this casing. if you are looking to have a better temp, just go ahead with silverarrow or d14. =)

[Rain]

Hey anyone know what happened to Prolinkdata? I liked buying Silverstone stuff from them but can't find the shop at SLS anymore..

Originally Posted by NCMK

I just hooted my Silverstone GD06 2 hrs ago. Prolinkdata said i was the first person to buy. Heh!!!

[audilogic]

Originally Posted by alphangel

yes, it will definitely affect the temp. also, it will be more advisable to use air-cooling hsf as i have tried using h50 b4 in the case and it does not work out that well and i switch back to air-cooling hsf. afterall, FT02 is built for air-cooling rig. =)

u12p is good enough inside this casing. if you are looking to have a better temp, just go ahead with silverarrow or d14. =)

did you try using the h50 with 2 fans in push pull as exhaust when you had your case? if you did, did that make any difference?

The u12p is a fantastic performer for me atm. however, because i will be shipping my cpu back from australia at the end of this year, therefore, i am a little worried about the big cooler hanging off my motherboard while its being shipped. hahaha. so i thought that the h70 might serve its purpose better in both heat dissipation and while its being shipped.