Page 1 of 4 123 ... LastLast
Results 1 to 15 of 58
  1. #1
    Master of past & present Shamino's Avatar
    Join Date
    Feb 2001
    Location
    The Abyss
    Posts
    13,450

    ASUS P5W DH Deluxe Simple Pencil Mods

    The ASUS P5W DH Deluxe is definitely a motherboard targeted
    at the enthusiasts. It looks good, performs well and offers quite a fair bit of
    overclocking features. Some of us, a more feverish group of enthusiasts like to
    take matters into our own hands however. Like a free-lance artist roaming the streets,
    I took my drawing pencil, this time round to the P5W DH.



    http://sg.vr-zone.com/?i=3876

    Includes VMem, VMCH, VFSB and Vcore all modded with pencil!!

  2. #2
    Registered User catacomb's Avatar
    Join Date
    Sep 2004
    Posts
    18,593
    nice

  3. #3
    ﺤﺎﻴïº*ï »± ﺒﻥ RaZieL03's Avatar
    Join Date
    Dec 2003
    Posts
    3,870
    Hmmm dont dare do that...
    Apple - MacBook Pro 15.4 inch
    Apple - Iphone 16g 1.1.4 firmware
    Canon - DSLR 400D

  4. #4
    Newbie of Past & Present yantronic's Avatar
    Join Date
    Nov 2004
    Location
    Paid Accomodation
    Posts
    22,899
    Artist Shamino-san?
    The opinions expressed above do not represent those of VR-Zone (VR Media PTE LTD Singapore) or any of their affiliates.


  5. #5
    Ogre
    Join Date
    Jul 2005
    Posts
    15,528
    where's my pencil!!!1
    Main : | 3570k 4.5 ghz | Gigabyte Z77 G1 Sniper 3 | Samsung 30nm 4x4gb 2133 CL 9 1.5v | Gigabyte Windforce 7950/GTX770 | HD204UI + ST31000528AS + Crucial M4 256GB | Stacker Clone | HX620 | 3007WFP-HC| Wave Pro |


  6. #6
    Registered User jozzy's Avatar
    Join Date
    May 2006
    Location
    Indonesia
    Posts
    133
    how bout vdrop?

  7. #7
    nop
    Guest
    I measured Vdimn last night but it read ~70 ohms instead of 575 ohms and VMCH's at 400 ohms instead of 444 ohms???? Was I do something wrong??

  8. #8
    Master of past & present Shamino's Avatar
    Join Date
    Feb 2001
    Location
    The Abyss
    Posts
    13,450
    Quote Originally Posted by nop
    I measured Vdimn last night but it read ~70 ohms instead of 575 ohms and VMCH's at 400 ohms instead of 444 ohms???? Was I do something wrong??
    think something wrong or maybe wrong setting w ur meter, shdnt be THAT low

  9. #9
    Hutch1ns
    Guest
    How much does the VMCH mod help? Right now I am hitting a brick wall at 430mhz with VMCH set to 1.65. I've seen a few others hitting walls around 400-420.

    Only other question I have is: Can this be done without A voltimeter/voltage meter? All the one's I have don't read that low. I know it's probably not suggested to do it without one however I'm willing to take a risk

    Thanks

  10. #10
    Master of past & present Shamino's Avatar
    Join Date
    Feb 2001
    Location
    The Abyss
    Posts
    13,450
    Quote Originally Posted by Hutch1ns
    How much does the VMCH mod help? Right now I am hitting a brick wall at 430mhz with VMCH set to 1.65. I've seen a few others hitting walls around 400-420.

    Only other question I have is: Can this be done without A voltimeter/voltage meter? All the one's I have don't read that low. I know it's probably not suggested to do it without one however I'm willing to take a risk

    Thanks
    on 975 helps till about 1.9v, thats whati find
    not advisaable at all
    plus theres no way to even tell what volts its really runing!

  11. #11
    Ogre
    Join Date
    Jul 2005
    Posts
    15,528
    aggreed. best buy a multimeter and measure resistance. measuring voltage might be too late already
    Main : | 3570k 4.5 ghz | Gigabyte Z77 G1 Sniper 3 | Samsung 30nm 4x4gb 2133 CL 9 1.5v | Gigabyte Windforce 7950/GTX770 | HD204UI + ST31000528AS + Crucial M4 256GB | Stacker Clone | HX620 | 3007WFP-HC| Wave Pro |


  12. #12
    Hutch1ns
    Guest
    Alright in a few hours (it's 04:46 here) I'm going to go grab a multimeter at radio shack. I just searched the garage and found 2 and neither will work for reading voltages this low.

    Will the stock cooling (with the crazy fan on the voltage regulators heatsink on) be enough or should I try to mod my Swiftech Premium 120 kit (I haven't used it yet, the Corsair Nautilus 500 kit is plenty) to fit the north bridge? Also, realistically, what should my expectations be for fsb speed? My goal from the time I ordered the E6400 was to hit 4 ghz, I'm stuck at 3.4 with the only limiting factor being the chipset voltage. Cpu running at 35*c full load at a mere 1.4125v. Brickwalled at 430mhz starting upping the chipset voltage around 390.

    Also, is there a hacked bios that allows more than 450? A new clockgen that allows higher than 500?

    P.S Shamino I love what you do, keep up the terrific work! I've been reading your articles for years and they only get better!

  13. #13
    Ogre
    Join Date
    Jul 2005
    Posts
    15,528
    Quote Originally Posted by Hutch1ns
    Alright in a few hours (it's 04:46 here) I'm going to go grab a multimeter at radio shack. I just searched the garage and found 2 and neither will work for reading voltages this low.

    Will the stock cooling (with the crazy fan on the voltage regulators heatsink on) be enough or should I try to mod my Swiftech Premium 120 kit (I haven't used it yet, the Corsair Nautilus 500 kit is plenty) to fit the north bridge? Also, realistically, what should my expectations be for fsb speed? My goal from the time I ordered the E6400 was to hit 4 ghz, I'm stuck at 3.4 with the only limiting factor being the chipset voltage. Cpu running at 35*c full load at a mere 1.4125v. Brickwalled at 430mhz starting upping the chipset voltage around 390.

    Also, is there a hacked bios that allows more than 450? A new clockgen that allows higher than 500?

    P.S Shamino I love what you do, keep up the terrific work! I've been reading your articles for years and they only get better!

    whats the fsb u're stuck on?
    Main : | 3570k 4.5 ghz | Gigabyte Z77 G1 Sniper 3 | Samsung 30nm 4x4gb 2133 CL 9 1.5v | Gigabyte Windforce 7950/GTX770 | HD204UI + ST31000528AS + Crucial M4 256GB | Stacker Clone | HX620 | 3007WFP-HC| Wave Pro |


  14. #14
    Hutch1ns
    Guest
    430

  15. #15
    Ogre
    Join Date
    Jul 2005
    Posts
    15,528
    u just need the mch mod. my guess is u should be able to reach abt 460 or so.
    Main : | 3570k 4.5 ghz | Gigabyte Z77 G1 Sniper 3 | Samsung 30nm 4x4gb 2133 CL 9 1.5v | Gigabyte Windforce 7950/GTX770 | HD204UI + ST31000528AS + Crucial M4 256GB | Stacker Clone | HX620 | 3007WFP-HC| Wave Pro |


Page 1 of 4 123 ... LastLast