VRForums > Enthusiast Tech Forums > Networking & Broadband
Ques on dual lans
Switch to Linear ModeSwitch to Hybrid ModeSwitch to Threaded Mode
Printer Friendly View | Email this page | Register Now to enjoy user benefits!
projectile
projectile's Avatar
In memory of Stauffenberg
Join Date: Jun 2004
Posts: 6,278
Trade rep: 100%
Ques on dual lans projectile Apr 12th, 07, 06:33 PM #1 (permalink)
LAN-1 : 192.xxx.xxx.xxx
LAN-2 : 172.xxx.xxx.xxx

How do u restrict afew selected specific services and application to run on 172.xxx.xxx.xxx whereas the rest of the services and application runs on 192.xxx.xxx.xxx

Anyone with a clue?
 
bluecoral
bluecoral's Avatar
MCP,MCSA,MCSE,MCDBA,MSHIT
Join Date: Jul 2005
Posts: 7,145
Trade rep: 100%
bluecoral Apr 13th, 07, 10:15 AM #2 (permalink)
that is to be done in the console in the router of each individual lan
CPU: AMD64 3000 Venice Cooled By Scythe Ninja | Mainboard: DFI LANPARTY NF4 ULTRA-D | Memory: 1GB Patriot PC3200 400MHz 2.5CL |Graphic: XFX 6600GT PCI-E 128mb Extreme | HDD: 80GB Seagate SATA + 300GB WD Sata| + 500GB WD AAKS Optical: LG DVDRW| Case: CM5 | Power Supply: Veridium Vortex 430W | Monitor:Samsung 713N | Input Devices: Saitek Eclipse KB, Razer Diamondback Plasma LE | Sound: Altec Lansing ATP 3 | Digicam: Casio Exilm S500 | Lappie: Asus A8J
PSP 3.40 OE 4GB Sandisk
 
projectile
projectile's Avatar
In memory of Stauffenberg
Join Date: Jun 2004
Posts: 6,278
Trade rep: 100%
projectile Apr 24th, 07, 11:23 AM #3 (permalink)
Ok finally get to rework on this issue again...

I have no firewall and no router...

basically its a private server for development.

Its running SAP Instances...

I still see some services like sapgwd01 open a port on the wrong IP network...

Specifically I just want all applcation's services to start only on one Specific IP address.

Any Guru to help me?
 
bluecoral
bluecoral's Avatar
MCP,MCSA,MCSE,MCDBA,MSHIT
Join Date: Jul 2005
Posts: 7,145
Trade rep: 100%
bluecoral Apr 24th, 07, 11:54 AM #4 (permalink)
application service to start on one specific ip ?
tot this should be on the server side and not the router side wor.
CPU: AMD64 3000 Venice Cooled By Scythe Ninja | Mainboard: DFI LANPARTY NF4 ULTRA-D | Memory: 1GB Patriot PC3200 400MHz 2.5CL |Graphic: XFX 6600GT PCI-E 128mb Extreme | HDD: 80GB Seagate SATA + 300GB WD Sata| + 500GB WD AAKS Optical: LG DVDRW| Case: CM5 | Power Supply: Veridium Vortex 430W | Monitor:Samsung 713N | Input Devices: Saitek Eclipse KB, Razer Diamondback Plasma LE | Sound: Altec Lansing ATP 3 | Digicam: Casio Exilm S500 | Lappie: Asus A8J
PSP 3.40 OE 4GB Sandisk
 
projectile
projectile's Avatar
In memory of Stauffenberg
Join Date: Jun 2004
Posts: 6,278
Trade rep: 100%
projectile Apr 24th, 07, 01:39 PM #5 (permalink)
Quote:
Originally Posted by bluecoral
application service to start on one specific ip ?
tot this should be on the server side and not the router side wor.

I have 2 lans on a server with Static IP, 172.xxx.xxx.xxx and the other 192.xxx.xxx.xxx

I try to config it on server side... but when I start SAP server in the windows console in that server, it starts SAP service on 172 and 192... which should only be on 172 only...
 
bluecoral
bluecoral's Avatar
MCP,MCSA,MCSE,MCDBA,MSHIT
Join Date: Jul 2005
Posts: 7,145
Trade rep: 100%
bluecoral Apr 24th, 07, 05:09 PM #6 (permalink)
hmm check out router access list wor...
and then check out which port the SAP service runs at.
then at the router console then deny the service at which the range of ip is at ba...
cant really rem now wor...
got to go find my books haha...
just nice to prepare for CCNA haha
CPU: AMD64 3000 Venice Cooled By Scythe Ninja | Mainboard: DFI LANPARTY NF4 ULTRA-D | Memory: 1GB Patriot PC3200 400MHz 2.5CL |Graphic: XFX 6600GT PCI-E 128mb Extreme | HDD: 80GB Seagate SATA + 300GB WD Sata| + 500GB WD AAKS Optical: LG DVDRW| Case: CM5 | Power Supply: Veridium Vortex 430W | Monitor:Samsung 713N | Input Devices: Saitek Eclipse KB, Razer Diamondback Plasma LE | Sound: Altec Lansing ATP 3 | Digicam: Casio Exilm S500 | Lappie: Asus A8J
PSP 3.40 OE 4GB Sandisk
 
projectile
projectile's Avatar
In memory of Stauffenberg
Join Date: Jun 2004
Posts: 6,278
Trade rep: 100%
projectile Apr 25th, 07, 05:57 PM #7 (permalink)
OK ok thks
 
port23
port23's Avatar
dlanorpi
Join Date: Dec 2004
Posts: 1,769
Trade rep: 0%
port23 Apr 28th, 07, 10:22 AM #8 (permalink)
Quote:
Originally Posted by projectile
I have 2 lans on a server with Static IP, 172.xxx.xxx.xxx and the other 192.xxx.xxx.xxx

I try to config it on server side... but when I start SAP server in the windows console in that server, it starts SAP service on 172 and 192... which should only be on 172 only...
Isn't it in the software config side to configure binding?
This is a computer generated message, no trees were harmed, a number of electrons were, however inconvenienced. In short, no signature is required.
 
projectile
projectile's Avatar
In memory of Stauffenberg
Join Date: Jun 2004
Posts: 6,278
Trade rep: 100%
projectile Apr 29th, 07, 01:27 PM #9 (permalink)
Thks for the responds... I finally know where to set the proity for the dual lan config...
 
« Previous Thread | Next Thread »
Top ↑VRForums > Enthusiast Tech Forums > Networking & Broadband > Ques on dual lans
NewsClassifiedsHome TheaterTechOverclockersGamersTravelChit Chat VRChat
Thread Tools Display Modes
Linear Mode Linear Mode
Quick Links
SITEX 2009 VRQuiz View All New Posts My Profile User CP PM VRChat Search Subscriptions Viewing Options Moderators
VR-Zone Articles
Zalman Unveils MFC1 Combo Fan Controller
Nvidia: Data on Fermi's gaming features "forthcoming"
Garmin-ASUS nuvifone M20 is now equipped with Windows Mobile 6.5
Samsung unveils Multimedia Player R0 in Korea
ASUS Unveils New Eee PC, EeeTop and EeeBox Powered by NVIDIA ION
More...
Find the best hotel rates here:
Destination:

City:

Check in Date:


Nights:
Rooms:
Adult(s):
Children:
travel.vr-zone.com
OCZ Fan Club!
OCZ Fan Club 21 OCZ Fans!
Win Visa GiftCard
Win Visa Gift Card