[jiex]

hi i have a E8500 + asus P5KPL

when i set the clock to 411 x 9.5 everything works fine.. but i adjust to abit more like 412 x 9.15 the system can boot up but the harddisk cannot be detected.

does that mean my cap is at 411mhz x 9.5 only? anyways to work around this to go higher clock?

[Caomei]

system unstable.. iirc wrong section

[eEnzo0]

Yup, P5KPL doesen't detect sata drives if you reach a higher FSB than 410.
I had this problem too.It's because of the southbridge and PCIEX.
on p5kpl you don;t have the option to raise or lock the pciex to 100... and the board encounters problems... glitches...

[Gollum]

the hdd cant catch up

[jiex]

Originally Posted by eEnzo0

Yup, P5KPL doesen't detect sata drives if you reach a higher FSB than 410.
I had this problem too.It's because of the southbridge and PCIEX.
on p5kpl you don;t have the option to raise or lock the pciex to 100... and the board encounters problems... glitches...

so meaning the max i can go is 9.5 x 410?

[eEnzo0]

yup... with that mobo that is the max you can do.