well i have two cards that are in use and there both moded an x1600 and a 7600
and i wanted to mod this card thats laying around in my room its a xmdia 6500 all it really is is a 6200 with gddr2 so i was woundering if u guys had some ideas http://www.xmdia.com/product_6200TC.html

[Shamino]

mod as in what kinda mod?

volt i cant find any guides

(volt mod)

[Shamino]

i need to see some close up pics sir

http://www.ixbt.com/video2/images/al...-scan-back.jpg
i dont have a cam but this is the best i could do but this is a 6200 with ddr i have the same layout but with ddr2

[Shamino]

check voltages on the points pointed and tell the codes on the 2 ICs.

what?

where did u go man

[Shamino]

if you can't understand what i said you shouldn't be modding

[DonNiger]

Hi

I killed my 9800GTX and was looking around something to play with. Found that I have NV6200TC 16mb (production sample). It should be fun to play with it for some time



It has NV44 core but all 4 corners are cut off. It is strange
The layout is almostly the same, exept it has only one IC on the back (that bigger one upper left corner).

The IC number is: ISL6549CB



I also made some measuring under load and idle

1: 3,33v
5: 2,563v 2,558v
6: 1,195v 1,185v
7: 1,201v 1,197v
8: 12,13v
11: 12,13v
14: 12,13v
19: 1,196v 1,196v
22: 1,195v 1,195v

The other's do not have value at all or it is around 9mv.

So, if anybody could jump in and help me to mod the mem and core, I would be happy

[DonNiger]

There is no resistance between Pin4 with points shown

[DonNiger]

But I still need the Vmem mod.