[Shamino]

CPU PLL VMOD

Just near Southbridge if you need more than 1.95v PLL:



You can use pencil or a 10K ohms VR. For 10K ohms VR set at 10k ohms first tune down for more voltage.


MCH GTLRef AKA FSB VRef & VFSB Swing




Beside chipset. Set at Max resistance and tune down to increase voltage. Both voltages are derived from CPU VTT - Default = MCH GTLRef ~ 0.66x VTT, VFSB Swing ~ 0.25x VTT.

Shamino can you expand on the term VFSB "swing" what is this swing? I see it is associated with the VTT so is it designed to accommodate the variance in VTT ?

[Shamino]

yea u can google for the intel x38 or p35 datasheets and read them, there are some more reference voltages, but some dont make a diff .

Cheers, I'll get right on the case!

[coolice]

Shamino,wats the measure point for VDIMM and VMCH?thanks

I'm about to sell my MSI P35 and buy a new board.. this Foxconn looks very sexy!

How is it compared to DFI Lanparty UT P35 T2R? The only problem I see is the vDroop... is there a vDroop Mod for the Foxconn MARS?

Thanks in advance!

[hdchopper]

ahhhhhhhh more good stuff thanks sham !!

guys..... anyone know which resistor to pencil to prevent vdroop? thanks.