[MickeyMouse]

Sham you can update your guide when you get time.



Results on AIR!!

[yantronic]

Thank you Jason

Hey Jason Im bout to try to go for WR with a single 6800GS on air too, Without voltmod's so far I get 525/1250 with stock cooling wondering if I should get the artic cooler or the Zalman Fatality. My cpu is on stock cooler but I will be removing the IHS tomm. and adding the XP-90C with Zalman 92mm fan So I should be @ 2800mhz maybe more Just wondering were you get those 10k VR's and 20k Vr's . I need someof those to mod the card thanks. Also I will be going for Sli too later in the month.

3dmark03 right on stock is 13558

thanks

[Shamino]

Thank you v much Jason shall update my article

[Shamino]

Sup!!

http://www.vr-zone.com.sg/?i=3027

[Nosfer@tu]

What voltages are you giving this baby, and will we see it on wather ???

Very nice scores! This will be my next card for sure.

[Nosfer@tu]

Originally Posted by Nosfer@tu

What voltages are you giving this baby, and will we see it on wather ???

I have like 25 Danes HUNGERING for voltage info

How much voltage did you need to acheave those Mhz?

[MickeyMouse]

1.65v gpu
2.25v vdd
no water runs as I sold the cards with the zalman cooling for $380 US for the set

Hey Shamino,

Did your GS volt mod works with AGP models of 6800GS? I have an eVGA 6800GS AGP, Part Number: 256-A8-N387-TX.

It have stock core clock 350 MHz. I have biodmodded to 450 MHz with stock core volt but It's showing some artifacts...can I just rise the core volt under NiBiTor v2.7? Or I need to volt mod with "manually" methods?

Hi there guys,

I dunno what happen, but this thread used to have more pages...someone delete it???

Well, I was talking with qwerty57 and shamino about apply this guide in AGP version of 6800GS and you ask If I can post some pics of my AGP card to see if this guide can be applied. So, here it is some pics:









After install Slim Volcano 10+ on my card:





So...what should I mod? I mean, what resistor, what measure points and etc.

THANKS A LOT! U GUYS R0X!!!

No one?

Take a look at Xtremesystems, there is a threat with a 6800 mod

I think the layout of the GS is the one of the GT´s, but I am not shure.

I hope this helps!

[Shamino]

u just need to pencil one resistor to increase vgpu,

where did the guides picture go?