[heatkiller]

Originally Posted by bianco

nice rig bro koz. i agree on the suggested rads; significantly cheaper than the feser ones and feser's quality has been in question recently.
on running clampless, take extra precaution on extra hot days though - i've read some horror stories in xs about the coolant being hotter than usual and those tubes slipping out of their barbs.

yup clampless no quite suit for asia climate = HOT HOT HOT ^^

UNless air-con room good low ambient gogogo W.C

[Kozato]

Originally Posted by heatkiller

yup clampless no quite suit for asia climate = HOT HOT HOT ^^

UNless air-con room good low ambient gogogo W.C

Not true. I am living in Singapore and my rig's WC setup has no clamps. If what you said is true, then the tubings would have dislodge itself from the barbs and caused a major leak a long time ago.

[cybotmaster]

Oh, yeah.. Do any bros here know where to get a waterblock for HDDs?

[r104_for]

Hi all, Zalman Reserator XT Hybrid Liquid Cooling System Titanium Black good for people like me tat new to wc?

[spyboy48]

Originally Posted by r104_for

Hi all, Zalman Reserator XT Hybrid Liquid Cooling System Titanium Black good for people like me tat new to wc?

anything that's compact has its limitation, though looks nice but performance is far off than using individual performance parts.
You can have better built waterblock, more spacious cooling performance rad and pump....etc

[r104_for]

Oic but how much will it cost if i only want to wc for CPU? (For DIY wc)

if i order from Edge2o - Watercooling Online Store (Singapore) this items den what are the item i will still need?


Swiftech MCR320 QP 3X120mm $99.95
Swiftech MCP655-B™ 12 VDC Pumps $139.95
Swiftech Apogee™ GTZ Ci7 $109.95
Tube?

[cybotmaster]

Originally Posted by r104_for

Oic but how much will it cost if i only want to wc for CPU? (For DIY wc)

if i order from Edge2o - Watercooling Online Store (Singapore) this items den what are the item i will still need?


Swiftech MCR320 QP 3X120mm $99.95
Swiftech MCP655-B™ 12 VDC Pumps $139.95
Swiftech Apogee™ GTZ Ci7 $109.95
Tube?

I guess you need a reservoir?

[spyboy48]

u stll need 3 good fans n 1/2 ID 3/4 OD hose /tubing...coolant, car coolant is still the best choice but mix with distilled water.
PC coolant is a no..no...for me.

[GegeV2]

Basically, u can get everything from Edge2O

Get the Yates and tubings from Edge2O

[lzxhenry]

Originally Posted by GegeV2

Basically, u can get everything from Edge2O

Get the Yates and tubings from Edge2O

Yup. agree. alternative is to use distilled water with feser 1/2" tubings

[r104_for]

Ty, so i will need all this?

7 ft Masterkleer Clear 1/2"-3/4"
Swiftech MCR320 QP 3X120mm $99.95
Swiftech MCP655-B™ 12 VDC Pumps $139.95
Swiftech Apogee™ GTZ Ci7 $109.95
Swiftech MCRES-Micro Rev2.
3 X 120MM FAN
coolant - Engine Ice
distilled water
Koolance quick disconnects < who order this before?
QDC (High Flow) No-Spill Shutoff, Male [For ID: 13mm (1/2"); OD: 19mm (3/4")]
QDC (High Flow) No-Spill Shutoff, Female [For ID: 13mm, 1/2"]
Hose Clamp [For OD: 13mm (1/2")]
Hose Clamp [For OD: 19mm (3/4")]

[mikotan]

Originally Posted by r104_for

Ty, so i will need all this?

7 ft Masterkleer Clear 1/2"-3/4" (10ft just in case - cut once measure twice)
Swiftech MCR320 QP 3X120mm $99.95 Not a bad rad but your gonna need high rpm fans
Swiftech MCP655-B™ 12 VDC Pumps $139.95 MCP 355 is a better choice quieter and better flow coupled with an XSPC restop
Swiftech Apogee™ GTZ Ci7 $109.95
Swiftech MCRES-Micro Rev2. if you opt to get the mcp355 the mcp restop will increase flow rate (GPM)
3 X 120MM FAN (for the 320 rad your getting you will be better of with 6 fans going push-pull config)
coolant - Engine Ice you dont need coolant. just use Distilled water w/ .999 silver coils or petrastech PHN solution
distilled water
Koolance quick disconnects < who order this before? DO NOT GET THESE! leaks galore with these in my and a few other folks experience
QDC (High Flow) No-Spill Shutoff, Male [For ID: 13mm (1/2"); OD: 19mm (3/4")]
QDC (High Flow) No-Spill Shutoff, Female [For ID: 13mm, 1/2"]
Hose Clamp [For OD: 13mm (1/2")]
Hose Clamp [For OD: 19mm (3/4")]

Err.... mmm let me link you to a guide on the evga forums.
Reading it up might give you a better idea.
Cumulative Watercooling (buying) Guide and FAQ
Most important of all is have fun building it... WCing is very addictive.

[r104_for]

TY all.

Item that i will buy for wc CPU (Replace my H50)

Feser Compression Fitting 1/2"-3/4" (8) $79.60
Swiftech MCP655-B™ 12 VDC Pumps (1) $139.95
EK-Multioption Reservoir 250 (1) $79.95
Tygon B-44-4X 1/2"-3/4" (8) $47.60
Swiftech MCR320 QP 3X120mm (1) $99.95
EK-D5 X-TOP - Acetal G1/4 Rev.2 (1) - $59.90