[Z_Dash]

Need some help and advice as its my first attempting playing unlocking.
Gotten a Phenom II x3 720
Batch is 0904 EPWM

Mobo used is Biostar TA790GXE 128M
Bios ver in mobo shows 8.00.11

Tried basic step
- ACC to "Auto" (Failed to boot)
- ACC to "All Cores" (Failed to boot)
- HT to 1600mhz then ACC to "Auto" (Failed to boot)
- HT to 1600mhz then ACC to "All Cores" (Failed to boot)
...................

Any suggestion which i could try?
Not too sure but i see lots of advice using 78DEA113 BIOS. Does it makes a diff?

Modded bios for seven Biostar models , X2-X3 @ quad - TechREACTION.net Forums

[Ar3s]

chinese bios that macclipper provided the link to, is the best for me. unlocked 4 cores very nicely. i just couldn't overclock them higher.

[Z_Dash]

Originally Posted by Ar3s

chinese bios that macclipper provided the link to, is the best for me. unlocked 4 cores very nicely. i just couldn't overclock them higher.

Found from another thread.....is this the website?

Chinese Bios

Download the modded Bios from this Chinese site"" bbs.ocer.net/viewthread.php?tid=290506&extra=&highlight=&page=1. "" Pls download both 78DFA617.part1.rar and 78DFA617.part2.rar to unrar them.
• Flash the Bios using the Bios Utility that comes with the MOBO and reboot
• Go into Bios to change your ACC to AUTO and HT speed to 1.6GHz. Exit and Save settings.