[kaiqi07]

Originally Posted by lee-turbo

there is a few type of package
ram block
ram block with heat spreader
heat spreader (depends on how many set u need)

BP heat spreader need some pre caution during installation
as there is no guide for u to sandwich the dim, so u got to align all
otherwise wil have issue during installation of ram block

just some exp when instal my heat spreader

nah, what is dom GT
u need this maybe

thanks bro for the advice. Now awaiting for all of the parts to arrive. The BP blocks and Kenclass MO items then i can finally mount all in! LOL cant wait sia...

[kaiqi07]

Found this pic using monsoon comp fittings. Take a close look at the orange tubing at the monsoon fittings.

Notice that the tubing is like only half inserted. This is the same case when I use XSPC and Masterklear tubing. This will happen if I pull with slight use of strength (to mimic cases of stress).

Headache Headache....

[K-Dash]

interesting, i thought of getting a pack of monsoon initially thinking of doing up my wife pc when the itch is really coming to its peak but i guess i will still stick with bp.

does this happens with only thick wall tubings or both?

[kaiqi07]

That I am not sure of. Many would argue the amount of strength I used. Although I am strong I am not dumb to use full strength to rip it off. I used adequate strength and it came half loosen which worries me.

But when I use the same amount of strength on BP fittings. 1mm MAXED or did not even shift at all.

Thin or thick walls I not sure as I only have these two brands. Kenclass said his works fine totally on Masterklear but mine is a bit loose.

I be grabbing some tygon from him soon to test out. Will let u guys know again.

Due to this, I decide not to fit the 6 pc of monsoon fittings into my rig till I find the suitable tubing.

[kaiqi07]

Gotten my last MO order for my rig from kenclass today. Thumbs up for his service and help.

Had gotten the following items,

1. 2 X phoyba 50mm extension fittings
2. 2 X koolance G1/4 multi transfer adapter
3. 4 x Phoyba G1/4 Rotary Fittings
4. 1 X Bitspower T joint rotaries fittings
5. 2 X Phoyba 3mm dual LED (red)
6. 1 X Bit Fenix 2pin Front Header Panel cable.
7. 1 X Koolance RP450X2 serial connection fitting
8. Mayhem Red Dye
9. Mayhem UV Pink Dye

Also coming in tonight are my order straight from Taiwan.

10. 2 X Bitspower Universal Galaxy Clear Plexi (4 DIMM)

But till now at 7.20 pm they yet to deliver and the CSO said its with the courier guys now.... Wonder what time then they will deliver...

[lee-turbo]

Originally Posted by kaiqi07

That I am not sure of. Many would argue the amount of strength I used. Although I am strong I am not dumb to use full strength to rip it off. I used adequate strength and it came half loosen which worries me.

But when I use the same amount of strength on BP fittings. 1mm MAXED or did not even shift at all.

Thin or thick walls I not sure as I only have these two brands. Kenclass said his works fine totally on Masterklear but mine is a bit loose.

I be grabbing some tygon from him soon to test out. Will let u guys know again.

Due to this, I decide not to fit the 6 pc of monsoon fittings into my rig till I find the suitable tubing.

maybe is the tube od
but as long as they didnt leak so would be ok de

[kaiqi07]

After this order from bitspower I conclude speedpost sucks to the core. Called them to check if items arrived yesterday in noon.

Told me arrived and courier be deliver at 6pm. 6pm past and call them to ask why yet to deliver, they say they have too many parcels to deliver so might be late and will deliver by 8pm.

At 8pm yet to see courier then call again to check and they say they will check for me and get back to me. But when I asked them don't they close their call centre at 8pm then the Cso suddenly change of voice and k we that he is screwed. Then he said most likely will deliver today.

So this morning call them to check if they can deliver before 2pm. They say no as delivery is between 9-6pm..... Wtf... Expect me to wait whole day at home .... By 6pm yet to deliver so call them again then they inform me that the item is at paya lebar post office and tell me that I can self collect there..... Freaking Singapore Post..

[kenclass]

never trust speedpost should call them slowpoke haha

btw hows my tubings?

[kaiqi07]

Tighter!
where can I get more of these babies!

Originally Posted by kenclass

never trust speedpost should call them slowpoke haha

btw hows my tubings?

[lee-turbo]

speedpost???
lol
dun use them lor

[kaiqi07]

Finally fixed up my loops. Started to work on it from 3pm -4.40am yesterday and did e leak test and filling from 2-6pm just now.

So glad everything went on well and no leakage except for some spillage due to over flow from the funnel.

Will post the pics up later

[lee-turbo]

faster faster

[kaiqi07]

Does anyone knows where to custom cables?

I need a Female Fan 3 Pin to 5 X 4pin Female Molex.

Need to use it for connecting to fan controller.

[kaiqi07]

After much wait, the wait is finally over.... Lots of confusion for the delivery of my Bitspower Universal Galaxy blocks as they are the last parts that I been waiting for so I could get started putting all the parts in and get my loop running.

Getting WC my rams was never in my plan as I think I dont need to cool them and my Corsair Vengence looks great as well. But the reason why I gotten the ram blocks is because, when I did a mock up tubing routing on drew on Adobe Flash. I found out if I were to install the ram blocks it actually helps better in terms of overall look of how the tubings are run across the system.



So I just do what I need to do. Whack First Talk Later.

So the package arrive in this huge box which u can see below,



Inside the huge parcel it contains these two black sexy boxes,




Unboxing the Bitspower Universal Galaxy Blocks.



Each kit contains 1 Nickel Block, 4 sets of Ram Spreaders, 12pc of Thermal Pads, Screws, extra O ring and Tool.

Removed the Corsair Vengence's ram heat spreader and installing the Bitspower Ram Spreader.



Installed all of the 8pc of memory with the new Bitspower's ram spreader into my ASUS RIVE. Do note I had also starting to install water blocks onto my board. Muahahahaha

[kaiqi07]

Installed all the blocks (CPU, RAM, MOBO and GPU) and starting to mount the fittings. and installed tubing on them.

During the planning phase, I had decide that I would go Looks > Temps (not saying I will not care about temps but I am sucker for looks)

So I decide to use 90D fittings for most of the fittings which in return kills a lot of flow. But since I am running 2 X MCP 655 running at full speed to compensate it.

Blocks, Fittings and Tubings installed:


Prefer tubings to run straight on mobo to have the neater look:


Mounted the board inside the case:


2 X 7970 with blocks went in and all tubings installed. Ready for filling of distilled water!



Fill up both the reservoir and doing leak test. (Blue Tint on the pic is due to the UV lights)