[moonSymph]

» Introductions.

This will be a Revamp Of Project Biscayne, Reason of renaming the project is because i've people keep asking me what does Biscayne means!!(PS: Learn to read the Project Log!! Just Kidding =P)
This will be my 2th Custom Part WaterCooling Project, I will not be using Very HIGH END component as i usually go for Value For Money Component(i dont have deep pocket so no fesser rad & HK 3.0 for me >.< =P)..Although this is my 4th WC Rig but my first 2 was Gigabyte/ThermalTake Kit so its not counted..

My first one was on my TJ-07 with Swiftech Apogee GT Bowed, MCW60+G80 Adap, MCW30 , MCP 655, Micro Res v1, Cooltrek 360 Radiator. Link to my First Custom WaterCooling Project Log Can Be Acess Below

My WaterCooling Journey

(Picture Link Was By Actually Down Due To Cyto Closing His Svr, But i've Repost all the Pictures in PhotoBucket(all source non-resize pic taken by my ex k800i.) Do Take Note moon elise® was completed but i did not post the picture of it due to changing of hardware and later going into NS, and i've never update my project log after that as i've sold the WC away..*I was unable to recover moon-elise project log picture as i dont have it in my computer..).

» Color Theme & Layout

The same color will be used with the additions of Orange mainly because of my DFI board which is Orange UV in color.. So the theme will be Red/Blue/Violet LED with Orange UV..

I've Revamp the Layout of the Project Log.. Basically I will still update with a new post but after the Project Log is Completed i will Consolidate everything into the Main Page, and Project Biscayne will be at the 2nd Page of the thread.. This is Done so that it will be easier for people to actually view my Log.. (Feel Free to Comment Regarding Layout) Basically i feel that the only people who will not be comfortable with my New Layout will be People with Slow Internet Connections(56k? loL who used it nowadays anyway) Due too Many Pictures. loL

» Specifications.

CPU: Intel Xeon E3120 [3.16Ghz 6MB Cache]
Mainboard: DFI DarK P45 T2RS
Ram: Geil Black Dragon PC6400 CL5 8GB Quad Kit
HDD: WD Black Caviar 500GB x2
GFX: PowerColor 4870 512MB DDR5 PCS+
PSU: FSP Epsilon 700W

» Cooling Used.

CPU Block: Swiftech Apogee GTZ
GFX Block: EK FC4870 Acetal Top
MCH Block: Swiftech MCW30
Pump/Reservoir: Swiftech MCP 355 + XSPC Res Top
Radiator: Swiftech MCR-QP320 Radiator
Tubings: Tygon B-44-4X Food, Milk and Dairy 1/2in. ID 5/8in. OD Laboratory Tubing # AAA00036
Fittings: Bitspower 1/2" FatBoy Metal Fitting & Koolance Angle + Compression Barbs..
Misc: PrimoChill Anti-Kink Coils 5/8" & Feser View UV Dye - PURPLE + Petra PT Nuke + Distilled Water
Fans: SanyoAce 109R1212H1011 12cm/38mm Fan

[moonSymph]

.Project Biscayne.

»»» Project Introduction, Casing Review & Modifications

»»» Fixing up the PC Component , Picture of the Case w/ Component Fixed.

»»» New Ram & WC Component , Leak Testing Of WaterCooling Component.

»»» Picture of My WaterCooling Family + Fixing Up/Filling The Loop & Problem Encountered.

»»» Result Between Stock Air VS WaterCooling(w/ CM HyperX Fan) on Q6600

»»» Updates!! New Angle Barbs + New 38mm Fan + New Fan Controller^.^.

»»» Finalise Picture Of WaterCooling, Project Biscayne done!

»»» Result WaterCooling(w/ SanyoAce 38mm Fan) on my Q6600.

[moonSymph]

revised

[moonSymph]

revised

[moonSymph]

revised

[moonSymph]

revised

[moonSymph]

Revised

[moonSymph]

Reserved for more pic.

[area-51]

HOOT DAH man solid mods u done man hahas

[moonSymph]

Thanks lol

Originally Posted by area-51

HOOT DAH man solid mods u done man hahas

[Tackline]

going to be interesting to see how you fit the WC components in that case...seems quite cramp haha..

[bianco]

i've seen a couple of builds in xs using this ss case.
good luck on your build and have fun liquefying it.


@tack... when will you please us and go wc?

[moonSymph]

should not be a problem bah sincemy radiator i planning to mount at the back of the pc.. and the loop only consist of 1 cpu block =).. i've another dtek lying around @ home maybe setting up dual loop once i get a better gfx.. now pocket quite weak already.. so now planning on the 2nd loop yet lol.

Originally Posted by Tackline

going to be interesting to see how you fit the WC components in that case...seems quite cramp haha..

[alpha1ma]

nice too see another wc rig up...

update us soon..

[Tackline]

Originally Posted by bianco

i've seen a couple of builds in xs using this ss case.
good luck on your build and have fun liquefying it.


@tack... when will you please us and go wc?

lol considering that i'm unemployed now with no income and government is taking its sweet time to draft me into ns...i dun think it will be anytime in the near future unfortunately