[Shrek]

Nothing better to do, so.....

before


water box


mobo tray


assembled


back


thanks to spyboy and smeagol for sponsoring some of the items.

[Shrek]

see it in action

[spyboy48]

I saw a gigabyte board on a tub
look like AMd2 or AMd3 socket....hmmmm....
kinston KVr ram.....
A lot of work going into the set-up, but eventually enjoyed dah

[bianco]

interesting setup.
isn't that psu a bit too heavy though and throws the center of gravity to that side?
would the psu wires reach the top if it was placed on the bottom container also?
and just cut another hole on the plastic container for the psu fan?

[spyboy48]

Originally Posted by bianco

interesting setup.
isn't that psu a bit too heavy though and throws the center of gravity to that side?
would the psu wires reach the top if it was placed on the bottom container also?
and just cut another hole on the plastic container for the psu fan?

Psu weight is resting on the edge of the container so the load is taken care of...saw cable tie too.

[Shrek]

cabletie is for the fan grills cos the res can go into the fan

[Shrek]

Originally Posted by bianco

interesting setup.
isn't that psu a bit too heavy though and throws the center of gravity to that side?
would the psu wires reach the top if it was placed on the bottom container also?
and just cut another hole on the plastic container for the psu fan?

nothing electrical on in the box. just in case something leaks

[GegeV2]

Nice and interesting

Hahas

[Shrek]

Originally Posted by GegeV2

Nice and interesting

Hahas

hehe too many spare parts around. Res,Rad,block,pump,box/psu are just lying there. so might as well haha

[GegeV2]

Originally Posted by Shrek

hehe too many spare parts around. Res,Rad,block,pump,box/psu are just lying there. so might as well haha

What's your rad?

2x120mm?

[Shrek]

Originally Posted by GegeV2

What's your rad?

2x120mm?

yeah

[spyboy48]

Originally Posted by GegeV2

What's your rad?

2x120mm?

cooltrek, come to think of it, his radiator have the space on top to act as reservior and topping up, $20 to mod it at a shop...easier to bleed and top-up too...LS done it before.

[GegeV2]

Ever thought of selling it?

Need a 2x120mm rad for spare usage hahas

If not have to get a new one

[Shrek]

Originally Posted by GegeV2

Ever thought of selling it?

Need a 2x120mm rad for spare usage hahas

If not have to get a new one

lol i fixed up swee swee liao leh haha

[GegeV2]

hahas ok

guess i have to get the cheapest of the lot, swiftech one then