still trying to find the Vdroop mod... and maybe the VFSB mod, but these two mods here are confirmed to be working by me, as I been using them for about a week now.
MCH volts at stock should read 1.2 volts or close, when at default bios settings.
when volt modded, you should get about .03 volts higher at it's max resistance.
Vdimm volts should read about 1.85 volts when at its default bios setting.
with the mod, it should read about .06 volts higher then that.
I've had the MCH to 1.7 volts, and the vdimm to 2.75 volts so far, and theres no real draw back to these mods.
sometimes volt mods, will make boards start acting weird. I haven't had any side effect to these mods yet, other then higher overclockability
also, there seems to be a interesting side effect to setting the MCH voltage to 1.55 volts or higher...
it will boot almost 100% of the time.
for some reason, that drastically changes the boards ability to recover from a failed OC.
with the MCH mod, definatly have active cooling on your northbridge.
will post other mods, if we find them.
if you guys find them, please share
droop mod is needed badly for this board.
Linear Mode
21 OCZ Fans!
