I found a very old 5.25' bay HDD Cooler by titian, some of u might have own it before. An Idea just came to me suddenly!
This is a Step By Step to convert this 5.25' Bay HDD cooler into a Ram Cooler! Huat Ar!
Items Needed (Black Spray Paint Is Optional)
1. Titian 5.25' Bay HDD Cooler *Actually any brand also can*
New At $10 SLS

2. Black Spray Paint
New At $3.80 also any shop ^^

How to DIY Your 1st Ram Cooler!
Step 1:
Cut half away from both sides of the HDD Cooler, its to shorten the height of the would be Ram Cooler

Step 2: (Optional)
Spray it Black ^^

Step 3:
Cut any High Density Foam to fit as holder of the Ram Cooler


Step 4:
Stick any brand of Double Sided Tape on 1 side of the Foam,
use the common thin ones will do.

Step 5:
Stick it to the Contact Points to the Ram

Step 6:
- Make sure u have 4 sticks of Rams on ur Mobo
- Estimate to make sure ur Ram Cooler is in the Center of ur Rams
- Press ur Foam on both sides of Ram to leave a Pressure Mark

















Linear Mode
21 OCZ Fans!